11
picture button again to take the picture. You will notice that the LED will fl ash
momentarily as the picture is being taken. When the fl ashing is complete
you can take more pictures. You can switch back and forth between Video
and Picture but remember you will have to press the appropriate button to
re-enter that mode.
®
HELI-MAX TX460 SERVO REVERSING
HELI-MAX TX460 SERVO REVERSING
This transmitter features SLT protocol. Therefore, it will bind with other SLT
receivers. In those applications, it may be necessary to reverse the servo
travel direction as follows:
❏
1. With the transmitter OFF, push
and “hold” the rudder trim button to
the right and the throttle trim button
down and then turn ON the transmitter
❏
2. Let go of the trim buttons and
you will see 1-1 or 1-0 displayed. The
first Digit is the channel number. To
change the channel you want to
reverse, push down on the right stick.
To reverse the travel direction, push
the elevator trim button up or down so
the second number changes. The
V-Cam travel direction settings should
be “1” for all channels.
❏
3. To confirm the change and exit
to normal operation, push down on
the left stick.
