13
The VIDEO button must be pressed once to change modes before the camera
will capture a video.
Installing the MicroSD Card
Remove the SD card from the
protective case. Flip the model over
and push the SD card into the slot on
the side of the camera module. When
the card is correctly installed, it will
click. To remove the card, simply press
on the card again and the inner spring
system will help eject the card. Note:
The card must be in place to capture
video or Pictures. The camera has no
internal memory.
Downloading the video and pictures from the camera:
Install the MicroSD card into the reader.
Plug the reader into the USB port of
your computer.
The USB connection will be auto
recognized and the files ready to be
transferred.
At this point you can copy or transfer
your files to your folder structure.
®
TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM:
1Si does not react to any stick movements.
Solution 1:
Make sure that the battery voltage is above 4.0 volts
Solution 2:
If the LED on the rear of the model is not steady, unplug the
battery and turn off the transmitter to allow the control board to reset itself.
After about a minute, turn on the transmitter and reconnect the battery.
PROBLEM:
Flies with poor power or buzzes.
Solution:
One of the props may be bent. Carefully bend it straight.
PROBLEM:
You notice that one of the motors spins noticeably slower
or feels tight.
Solution:
R
eplace the motor. This is done by removing all 4 props and
