Helgi Europe
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
[email protected] | [email protected]
www.helgi-solutions.com
7
3.0 INSTALLATION
The installation of this type of screens can be to wall or to the ceiling.
3.1 INSTALLATION INSTRUCTION
To make a correct installation, position the two suspension brackets in such a way that the screen is
suspended about 1 / 15 of its length, measured from one of the two terminal heads.
Fix the brackets to obtain an alignment as accurate as possible.
Use reliable anchors and appropriate to the wall, minimum recommended size diameter mm. 8.
IMPORTANT!
Make sure that wall or ceiling are appropriate to support the declared weight and to the
installation through screw anchors.
When in doubt, use chemical fixings type . Once brackets are fixed, lift up the screen and attach it on the
appropriate tab of the bracket, then slightly tighten the front screw and tighten the lock bolt.
This must be done by two people, one from the left side, the other from the right side.
IMPORTANT!
Choose walls with a flat surface, otherwise the bracket tag will not ensure the suspension of
the screen.
