Helgi Europe
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
[email protected] | [email protected]
www.helgi-solutions.com
5
5.0 MAINTENANCE OF THE SCREEN
The screen do not need any particular maintenance: it need only normal maintenance. Mechanical parts:
free from dust using a colourless soft clean cloth, and, if it is the case, a not aggressive detergent. Projection
surface: use a soft, clean, wet cloth, eventually combining neutral detergents. Since the fabric could be
charged with static electricity after cleaning due to the rubbing with the cloth, it is advised to apply an anti-
static liquid on the fabric with a clean cloth, to prevent dust from being attracted again. Avoid to pass with
detergents on the black borders.
5.1 USE OF THE SCREEN AFTER A LONG STORAGE TIME
5.1.1 Check the storage conditions of the screen:
•
if it has been protected in a proper way
•
if it has been covered in the right way
•
if it has been stocked in a humid or saline or dusty place
5.1.2 Essential checks:
•
the condition of the screen: if it has been attacked from humidity or water, if the paint is intact, if
the screen is without dust
•
if the main parts are intact
•
the state of efficiency of the electrical parts
•
the start-up should be made following the instructions of this booklet
5.1 DISPOSAL
It is inevitable when the screen should be damaged and irrecoverable.
5.1.1 Preliminary operations
•
disconnect the power supply
•
remove the cables and the electric motor
•
remove all the plastic parts
5.1.2 Subdivision of the materials
•
Divide the plastic, rubber and other parts form the aluminium ones. Plastic and rubber parts should
be disposed as special waste and follow the antipollution laws of the Country.
