Helgi Europe
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
[email protected] | [email protected]
www.helgi-solutions.com
4
4.0 WHAT YOU HAVE TO DO AND WHAT YOU HAVE TO AVOID
4.1 Always
•
follow the indications and the instructions in the handbook and check the integrity of the machine
parts
•
follow the indications and the instructions showed on the machine; the warning labels have to be
clearly readable
•
prove the functionally of the command key
4.2 Never
•
change, tear off the adjustment of the safety system and / or tamper with the machine
•
do any temporary repairing or any not-complying-with-the-instructions attempt to repair
•
make the machine perform any operations for which it has not been conceived
•
cover, tamper with, tear off even if partially the labels that are on the machine
5.0 INSTALLING AND USING THE SCREEN
•
Remove the straps only when installation is completed.
•
Screen should always been operated from the front and not from rear.
•
Pay attention that hands are not placed in mechanism while the screen is being opened or retracted.
•
In case of emergency push the red button on the left side of the screen to stop it.
•
Be sure that the screen is installed on a perfectly horizontal surface.
•
Be sure that any obstacle is present while the screen is opening and closing.
•
Before connecting the screen to the main switch check that the main switch supply correspond to
the voltage of the screen.
•
Connect the screen to an earthed power point.
•
The screen can be supplied with electric switch or with radio remote transmitter, both with three
buttons for open, stop and close the screen. Push the “up” button to open the screen, push the
“stop” button to stop the screen at any position, push the “down” button to close it.
•
Never modify the setted up and down limit switches.
