Installation instructions article no. 36887,36888
Page 1 of 2
Stand 06.2014
Installation and operating instructions
LED built in ground spotlight Bochum 3er- Set
Art. no. 36887, 36888
Many thanks for deciding to buy our lights.
Our built-in ground spotlight is made out of sturdy, high value materials and will provide you with quality lighting.
The built-in ground spotlight consists of an aluminium housing, a built-in plastic pot and a stainless steel cover.
The built-in ground spotlight can support a maximum load of 5kN. It can be installed in interior and exterior areas,
as a feature in the garden, for example, or on lawns. highest rated temperature at the surface 65°C
Please read through the installation and operation instructions carefully and keep these in a safe place.
We do not accept any liability for damage to persons or property caused by not following the instructions, or
improper use or for changes made to the product.
Packaging contents:
3 built in ground spotlights with plastic ground housings 5kN
3 LED luminants 1 x 3W
1 transformer with connection lines
Installation and operating instructions
Technical Data:
Article
Model
Description
Protection
type
.
Protection
class
.
36887
round
Set of 2 built in ground spotlights
IP 67
III
1 transformer with connection lines
Prim. 230-240V~, 50 Hz; secondary 12 V ~, 1.67A, 20VA
IP 64
II
3 LED luminants 1 x 3W (per spotlight)
can be exchanged, GU5,3, MR16, ww
III
36888
angled
Set of 3 built in ground spotlights
IP 67
III
1 transformer with connection lines
Prim. 230-240V~, 50 Hz; secondary 12 V ~, 1.67A, 20VA
IP 64
II
3 LED luminants 1 x 3W (per spotlight)
can be exchanged, GU5,3, MR16, ww
III
Safety and warning notice:
Take the parts carefully out of the packaging.
Make sure that the connection values for the power supply to your building installation agree with the
data on the rating plate.
Make sure, before using the spotlight that this has not been damaged during transportation. Do not
operate the spotlight if the housing, safety glass or electrical parts are damaged. Repairs may only be
done by a specialised electrician.
Each faulty or damaged safety glass (or other parts of the protective cover) must be replaced
immediately.
Watch out during positioning for possible dangers from dry or overhanging branches or grasses and
other parts.
Keep the packaging material well away from children and household pets. Danger of suffocation!
Never expose the spotlights to a direct water jet (High pressure cleaner) and never immerse the
spotlights into water or other liquids!
Do not look directly into the LED - especially for longer periods of time - without protecting your eyes. A
LED beam should not be directed into other people's eyes.
The entire product must not be changed or modified. Changes made to the spotlight lead to invalidation
of the guarantee (warranty).
Care and maintenance:
You must make sure that the power supply has been disconnected before cleaning.
Use a dry or a slightly moist cloth for cleaning.
Never use chemicals, inflammable cleaners or abrasives. These can damage the surface coating and/or
the insulation or the gaskets of the lights
Disposal:
Used electronic devices must be brought back to public collection points and must not be disposed of as
household waste.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
