Installation instructions Art no. 28666, 28667, 28668
Page 2 of 2
Status 11.2010
Installation:
Make sure that the connection values of your building installation for the power supply to the
light comply with the data stated on the name plate of the mains power supply unit.
The under cabinet light is suitable for mounting on normal, flame-proofed surfaces. Only for
use in inside rooms. Do not install the light near heat sources, gas or oil lines or open sources
of flame.
Several surface mounted lights and/or under cabinet lights can be connected to each other –
see the table for technical data. Please use the plastic connector or the connection cable
included in the scope of delivery for this purpose.
Decide on the location where installation has to take place. The lights are suitable for surface
mounting or installation under cabinets. Install the holders for surface mounting or installation
under cabinets first of all.
Make sure that the base and the fastening materials are suitable for supporting the weight of
the light permanently and reliably.
Press the light into the holder until it locks into place after fastening the holders.
Now insert the supply line into the connection at the light. Make sure when you are laying the
cable that the cable and the plug are free from tensions and twisting forces. Do not bend the
cable.
Connection is made to the mains after the installation work has been completed.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
ON/OFF
