Installation instruction
Page 1 of 2
Status 22/06/2017
GB Installation and operating instructions
Light
Art. No. 27678,27679
Many thanks for deciding to buy our lights.
Our light is made out of sturdy, high value materials and will provide you with quality lighting. The light can be
used in indoor or outside areas.
Please read through installation and operation instructions carefully and keep these in a safe place for
future reference.
We do not accept liability for damage to persons or property caused by non observation of the instructions,
improper handling or for unauthorized changes made to the product.
Package contents:
Light
Installation and operating instructions
Technical data:
Article
Connection
Size
Illuminant
Prote
ction
type
Protection
Class
27678
220-240V AC
1-spot
1 x lamp E27 ESL max. 23W,
LED max. 16W
IP 64
II
27679
220-240V AC
1-spot
1 x lamp E27 ESL max. 23W,
LED max. 16W
IP 64
II
Before installation:
The light can only be operated outside of the packaging.
Take the light carefully out of the packaging.
Make sure, before using the light that it has not been damaged during transportation. The light must not
be used if the electrical parts are damaged. Repairs may only be done by a specialist electrician.
Keep packaging materials well away from children and pets. Suffocation hazard !
Safety and warning notes:
Use of the light is strictly forbidden if is damaged.
Never leave children at play without supervision in the area of lights.
The illuminant will become hot when used. The outer lamp housing will also become hot. Do not touch
the light with your bare hands when it is being used.
The entire product may neither be changed nor converted. Changes made to the product lead to
invalidation of the guarantee (warranty).
Changing the illuminant:
Only use the above mentioned illuminant. The use of unsuitable illuminants can lead to overheating.
Disconnect the power supply before changing the illuminant.
The light has to cool off for a sufficiently long period of time if the illuminant is changed immediately after
it fails.
Carefully remove the illuminant from the holder. Screw the new illuminant carefully into the holder. Do
not use force or extreme pressure.
Check that the illuminant is properly seated in the holder before use.
Care and servicing:
Make sure that the power supply has been disconnected before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning.
Disposal:
Used electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
