-4-
3.1 Systemen A, B and C
The inlet side of the ´Recoh-drain´ can be connected to the tap water system in the house. The outlet side can be
created in several ways, namely:
A.
Combined connection of the heat exchanger to the cold water connection of the shower's mixer tap and
the water heater.
B.
Connection solely from the heat exchanger to the tap water connection on the shower's mixer tap.
C.
Separate connection of the cold water connection to the water heater.
The largest saving is achieved by using System A
3 Installation
.
System B
boiler
Discharge
tap water
supply
mixer
tap
Recoh-drain
preheated
tap water
boiler
Discharge
tap water
supply
mixer
tap
System A
Recoh-drain
preheated
tap water
System C
boiler
Discharge
tap water
supply
mixer
tap
Recoh-drain
preheated
tap water
Should you have any comments or additions to this manual, please do inform us ([email protected]).
Edition : 04-2014
In construction phase: don’t flush cement, glue, etc. through the Recoh-drain.
Maintenance and cleaning according to the userguide.
It is not recommended to flush shaving gel and toothpaste since they are very sticky and could adhere to the plates
of the heatexchanger.
4. Maintenance and cleaning
