CONNECTING TO BATTERY
1. Set any charger switches to “off” position and remove AC cord from electric
outlet before connecting or disconnecting DC output clamps or eyelets.
Never allow clamps or eyelets to touch each other.
The battery terminal not connected to the chassis has to be connected first.
The other connection is to be made to the chassis, remote from the battery
and fuel line. The battery charger is then to be connected to the supply
mains; After charging, disconnect the battery charger from the supply mains.
Then remove the chassis connection and then the battery connection.
2. Identify the correct polarity of the battery terminals. The positive battery
terminal is typically marked with (POS, P, +). The negative terminal is
typically marked with (NEG, N, -).
3. Position cords and cables to reduce risk of damage by hood, door or moving
parts (including fan blades, belts, and pulleys) or other parts that could
cause injury to persons.
4. Do not connect to carburetor, fuel lines, or sheet-metal body parts.
8
