7
CORDLESS DRILL
The charger is intended for indoor use only.
7. FEATURES
7.1 Keyless chuck (1)
A keyless chuck is included on your drill to allow for easy installation and removal of bits/accessories. The
chuck is divided into two parts. The rear is called the collar and the front is called the body.
To open and close the keyless chuck, grasp and hold the collar of the chuck with one hand and rotate the
chuck body with your other hand. The arrows on the chuck indicate in which direction to rotate the chuck
body in order to GRIP (tighten) or release (unlock) the drill bit.
WARNING: Do not hold the chuck body with one hand and use power of the drill to tighten
or loosen the chuck jaws. The chuck body could slip and your hand could come in contact
with a rotating accessory. This could cause an accident resulting in personal injury.
7.2 Torque adjustment ring (2)
The drill has a torque adjustment ring. It allows you to select the desired torque depending on the task
you have to perform (drill / different types of screws into different materials). The proper setting depends
on the type of material and the size of screw you are using.
TO ADJUST TORQUE: Identify the 21+1 torque indicator settings located on the front of the drill. Rotate
adjusting ring (2) to the desired setting. The lower the number, the lower the torque setting. The higher
the number, the higher the torque setting.
7.3 On/off switch (5)
To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. The switch trigger
can be locked in the OFF position. This feature helps reduce the possibility of accidental starting when not
in use.
7.4
Forward/reverse selector (right/left rotation selector) (4)
The drill has a forward/reverse selector located above the switch trigger.
F(Forward) (Forward): Press selector on right side of machine (to the left side): drill turns right (forward,
fasten screws).
R(Reverse) (Reverse): Press selector on left side of machine (to the right side): drill turns left (reverse/
loosen screws).
CAUTION: To prevent damage to the gearbox, always allow the chuck to come to a complete
stop before changing the direction of rotation or selecting another speed (HI-LO). To stop,
release the trigger switch.
7.5 Speed selector (3)
Your cordless drill has a two-speed gear, designed for drilling or driving at LO or HI speed. A slide switch is
located on top of your drill to select either LO (1) or HI (2) speed.
7.6 LED work light (6)
Your cordless drill is equipped with an LED light at the front (above the ON/OFF switch) above the battery
pack. The white LED light will light when you operate the machine, providing the work area to be lighted.
7.7 TPR soft grip
Summary of Contents for VMGA003
Page 11: ...11 CORDLESS DRILL...
