www.heinner.com 1600W, 50Hz, 220-240V
9
1. Read all instructions carefully before using.
2. Make sure the voltage is the same as that indicated on the rating plate of the
appliance.
3. Do not operate this appliance if the cable or plug becomes damaged.
4. Keep the appliance and cable away from sources of heat, sharp objects or anything
that may cause damage.
5. If the cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
6. Ensure the appliance is switched off before connecting to the mains power supply.
7. Switch off the power supply and disconnect from mains supply when not in use,
before cleaning or other maintenance.
8. To disconnect the appliance, switch it “OFF”, and then remove the plug from outlet.
Do not pull the cord to disconnect the plug.
9. The heater must not be located immediately below a socket-outlet.
10. Do not operate in areas where gasoline, paint or other flammable liquids are used
or stored.
11. Indoor use only.
12. In order to avoid overheating, do not cover the heater.
13. To prevent a possible fire, do not block air intakes or exhaust in any manner.
14. Don’t touch the hot surfaces.
15. Do not insert or allow foreign objects to enter any ventilation or exhaust opening,
as this may cause an electric shock, fire or damage to the appliance.
16. Always ensure that hands are dry before operating or adjusting any switch on the
product or touching the plug and socket-outlet.
17. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
18. Children should be supervised to ensure that they do not play with the appliance.
19. Do not leave this appliance unattended when it’s in use.
20. The most common cause of overheating is deposits of dust or fluff in the
appliance. Ensure these deposits are removed regularly by disconnect the appliance
and vacuum cleaning air vents and grilles.
21. Do not place the heater on carpet, don’t place the cable under carpets. Arrange
cord away from traffic areas so that it will not be tripped over.
III.
SAFETY MEASURES
