Heinner HPCK-6IX, User Manual

Page: 31 / 89

www.heinner.com 1000W, 50/60Hz, 220-240V
30
Disassemble and install the block proof cover and seal ring
1. Check if the seal ring and block proof cover are correctly installed in the upper cover
before use each time.
2. After use, please clean the seal ring and around of block proof cover for avoiding
jamming the cover. Also, very important, in order to avoid impregnation of bad
odours, when cleaning the seal ring you can use the following: lemon juice, vinegar,
sodium bicarbonate.
3. Please do not pull the seal ring, otherwise, the distorted seal ring may influence the
seal ring and pressure effect.
4. Do not use the damaged seal ring, please replace it at the authorized repair office.
Use and maintain the inner pot
1.Do not empty
It may cause yellowish and spotted inner pot or distorted bottom if it is empty for a long
time.
2. Do not use it to store the acid, alkali and preserved foods for a long period
Although the inner pot has excellent anti-corrosion performance, it may cause corrosion
of certain degree, the suggested time of keep warm shall not exceed 2h.
3. Keep it clean to prolong the service life
Do not immerse it in water for a long period. Clean the inner pot with soap, weak
detergent or warm water to remove dust, oil and dirt.
4. Do not use a metal shovel or other harder tool, otherwise it will damage the inner
surface of pot.
Disassemble Pull it out upwards Install
Press it down to install
Disassemble and
install the block
proof
Block
proof
cover
Disassemble Pull it out upwards
Install Press it down to install
Disassemble and
install the seal
ring
Sealing