www.heinner.com 2500W, 50/60Hz, 220-240V
18
VI.
USING INSTRUCTIONS
1.
Before using the heater make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline.
2.
- ON/OFF setting
a.
With the heater plugged into an electrical outlet, the display will show “OFF”.
Press the power button once to turn on the radiator, to lowest power setting,
showing “LO” on the display. The LED display blinks, and after three seconds, it
shows the environment temperature. Note that the heater measures the
environmental temperature around the heater and may not give accurate
temperature readings for different parts of the room.
b.
Press the
again, the heater will increase power to the highest setting, and
show “HI” on the display.
c.
Press the
again to turn off the radiator and the display will show “OFF”.
3.
or
UP or DOWN
a.
When the radiator is on, press
or
to adjust the temperature setting. And
the indicator will turn on.
b.
Press it once, the temperature will increase or decrease one degree. After three
seconds, the display will show the environment temperature. Keep pressing
or
to set the temperature quickly.
c.
The temperature setting range is from 5-27°C.
4.
TIMER
a.
When the radiator is on, press
to set timer and the indicator light will turn
on.
b.
Keep pressing
and the timer will cycle through 1 hour settings
1→2→3→4→5→..... →23→24→00.
c.
After the timer is set, it will count down, and the radiator will turn off after the
timer expires.
d.
After three seconds, the display will return to the room temperature.
