Heinner HMSF-D3WH, Instruction Manual

Page: 22 / 49

www.heinner.com 40W, 50Hz, 220-240V
21
Fig. 8
2. Remote controller (Fig. 8)
ON/OFF KEY
The key is for switching on the fan. The fan will be started at low speed. Press the key
again, it will be switched off.
TIMER KEY
When this key is touched repeatedly, the time to be set 1, 2 and 4 hours and the
correspond pilot lamp will light. If th
e lamp don’t light after you touched the key, the
fan will run continuously.
SPEED KEY
After the fan has started, this key serves as a speed selector in the sequence from
“low -medium-high- low” when this key being touched repeated or continuously.
MODE KEY
Press The M to select mode. The sequence is normal, natural and sleep when this M
being touched repeatedly or continuously. The light can indicate mode state, It can also
be controlled by remote control. Type changes in the sequence from
NORMAL---NATURAL---SLEEP---NORMAL wind when this key being touched repeatedly
or kept in.
Fig. 8