Heinner HMC-300BL, Manual

Page: 5 / 41

www.heinner.com 300W, 50Hz, 220-240V
4
V. USING INSTRUCTIONS
Prior to initial use of the product, thoroughly clean the parts in contact with food.
(See "Care and Maintenance").
1. The deputy chopper mounted on a chopper rotating clamping (fig.1).
2. First Chopper combination into the transparent cup, then food into the
transparent cup (fig.2).
•
before meat processing needs to tendons, bones, skin removed; the need to
thaw frozen before processing
。
• Meat ingredients please cut 20mm block.
• Meat ingredients added in an amount not exceeding 1/2 cup, or will affect the
life of the product and shredding effect.
3. Place the lid onto the transparent cup and pressed by level (fig.3).
4. Cover the body into the transparent cup, check that bit away, and make sure
the body and the lid, the chopper assembly in place (fig.4).
5. 1) power, the left hand holding the body, right hand to press the button
(button I or button II) to start Work, working time
≤
30 seconds (fig.5).
2
）
Processing is completed, release the button, disconnect the power
supply when the chopper stops, remove the body, open the lid, take out the
chopper and food (chopping knife is very sharp, be careful not to cut the time
taken to hand or other body parts). Remove the ingredients with a spatula.
•
shredding time may refer to "stirring chopped Food Guide", consumers can
effect according to individual preferences for food chopped to shorten the time.
•
If food sticks to the cup, turn off the power, then scraped with a spatula for
processing.
•
Machine cannot be used to process frozen meat, dried beans, rice and
other hard foods
•
If the machine because of the uneven distribution of food and shake, turn
off the power, the food evenly distributed in the cup body reprocessing.
•
If within 30 seconds did not reach the desired effect, turn off the switch,
two minutes after processing. This method will help extend product life.