Heinner HFH-L2000GD, Instruction Manual

Page: 12 / 29

www.heinner.com 1000W/2000W, 220-240V~50Hz
.
SYMBOL FUNCTION
Your heater is equipped with a 4-position rotary switch

Set the rotary switch to maximum for fast warm up of a room. Once the room is
comfortable, select a lower setting to reduce electrical consumption and to prevent
the room from becoming too warm.

Adjust the thermostat to maximum and select the desired power setting. Once the
room is comfortable, rotate the thermostat counterclockwise, until the heater shuts
off. The thermostat will now maintain the temperature by cycling the heater on or off.
During particularly cold weather, the low power setting may be insufficient to satisfy
the thermostat. Select a higher setting for these periods.

It is better to work for 5-10 seconds in only fan mode before turning off the fan.
OVERHEATING

The thermostat will turn the machine off it overheats.

Overheating can be caused by obstruction to the air intakes on the back of the
machine or the grill on the front .If this occurs please disconnect the machine and
allow it to cool for 30 minutes. Remove any obstruction and turn the machine back
on.
SAFETY TIP-OVER SWITCH:

The appliance is fitted with a tip-over switch. When you use the appliance in an
upright position on a flat and stable surface, the tip-over switch will be on. In the
event the heater is knocked over, the heater will stop functioning automatically.
OFF
FAN ONLY
LOW HEAT
HIGH HEAT
IV. USING THE APPLIANCE