Heinner HFF-N80A+, User Manual

Page: 22 / 67

www.heinner.com
21
WARNING! Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by
the manufacturer.
WARNING! The refrigerant and insulation blowing gas are flammable. When
disposing of the appliance, do so only at an authorized waste disposal centre.
Do not expose to flame.
Refrigerant
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of
the appliance, a natural gas with a high level of environmental compatibility,
which is nevertheless flammable.
During transportation and installation of the appliance, ensure that none of the
components of the refrigerant circuit becomes damaged. The refrigerant
(R600a) is flammable.
Caution: risk of fire
If the refrigerant circuit should be damaged:
-Avoid opening flames and sources of ignition.
-Thoroughly ventilate the room in which the appliance is situated.
It is dangerous to alter the specifications or modify this product in any way.
Any damage to the cord may cause a shortcircuit, fire, and/or electric shock.
Electric safety
1.
The power cord must not be lengthened.
2.
Make sure that the power plug is not crushed or damaged. A crushed or
damaged power plug may overheat and cause a fire.
3.
Make sure that you can access the main plug of the appliance.
4.
Do not pull the main cable.
5.
If the power plug socket is loose, do not insert the power plug. There is a risk
of electric shock or fire.
6.
You must not operate theappliance without the interior lighting lamp cover
7.
The fridge is only applied with power supply of single phase alternating
current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so
large that the voltage exceeds the above scope, for safety sake, be sure to
apply A.C. Automatic voltage regulator of more than 350W to the fridge. The
fridge must employ a special power socket instead of common one with other
electric appliances. Its plug must match the socket with ground wire.