Heinner HFF-274NFF+, Manual

Page: 32 / 109

www.heinner.com
31
WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING! Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
WARNING! Do not damage the refrigerant circuit.
WARNING! Do not use electrical appliances inside the food storage compartments of
the appliance, unless they are of the type recommended by the manufacturer.
WARNING! The refrigerant and insulation blowing gas are flammable. When disposing
of the appliance, do so only at an authorized waste disposal centre. Do not expose to
flame.
WARNING
— When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING
— Do not locate multiple portable socket-outlets or portable power supplies
at the rear of the appliance.
REPLACING THE ILLUMINATING LAMPS
WARNING - The illuminating lamps must not be replaced by the user! If the
illuminating lamps is damaged, contact the customer helpline for assistance.
This warning is only for refrigerators that contain illuminating lamps.
Refrigerant
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the
appliance, a natural gas with a high level of environmental compatibility, which is
nevertheless flammable.
During transportation and installation of the appliance, ensure that none of the
components of the refrigerant circuit becomes damaged. The refrigerant (R600a) is
flammable.
WARNING
— Refrigerators contain refrigerant and gases in the insulation. Refrigerant
and gases must be disposed of professionally as they may cause eye injuries or
ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper
disposal.
WARNING – RISK OF FIRE
If the refrigerant circuit should be damaged:
- Avoid opening flames and sources of ignition.
- Thoroughly ventilate the room in which the appliance is situated. It is dangerous to
alter the specifications or modify this product in any way.
- Any damage to the cord may cause a shortcircuit, fire, and/or electric shock.