Description of the appliance
View of the appliance
1.Butter/cheese compartments
with flap and egg storage insert
2. Door storage compartment
3. Bottle shelf
4. Temperature regulator
5. Storage shelves
6. Vegetable drawer cover
7. Vegetable drawer
8. Leveling leg
1
2
3
4
5
6
7
8
Reversing the door
1. Stand the refrigerator, use a flat bladed
screw driver to remove the 4 screw covers at
the rear of the refrigerator lid.
2. Unscrew and lift the lid from the rear
and remove it, then lift the upper door and
place it on a padded surface to prevent it
scratched.
The side at which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site requires.
Tools you will need:
1. 8mm socket driver
2. cross-shaped screwdriver
Before you start lay the refrigerator on it’s
back in order to gain access to the base,
you should rest it on soft foam packaging or
similar material to avoid damaging the
cooling pipes at the rear of the refrigerator.
3. Putty knife or thin-blade screwdriver
Note:
Due to unceasing modification of our products your refrigerator may be slightly different
from this Instruction Manual, but its functions and using methods remain the same.
www.heinner.com
9/11
