8
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether you have sufficient space
under your countertop and whether the wiring-plumbing is suitable to do so.
1
If you
decide that the space under the countertop is suitable for fitting your machine, remove the
worktop as shown in the illustration.
2
Warning
: The stand part which we will settle our machine under it by removing its worktop
has to be stable in such a way not to allow balance disorder.
To remove the worktop, remove the screws that hold the worktop which are located at the
rear of the machine; then push the front panel 1 cm from the front side towards the rear
and lift it. Adjust the machine feet accprding to the slope of the floor(
3
)
Fit your machine by pushing it undercounter without letting the hoses get crushed or bent.
(
4)
Warning
: After removing the top panel of your dishwasher, the machine should be placed
in a space of the dimensions shown in the figure below.
