24
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR CODE
ERROR
DESCRIPTION
CONTROL
Wash
Rinse
Dry
End
Start/
Pause
Inadequate water
supply
• Make sure the water input tap is totally open
and that there is no water cut.
• Close the water input tap, separate the water
input hose from the tap and clean the filter at
the connection end of the hose.
• Restart your machine, contact the service if
the error resumes
Error of continuous
water input
• Close the tap.
• Contact the service.
The waste water in
the machine cannot
be discharged.
• Water discharge hose is clogged.
• The filters of your machine might be
clogged.
• Power off-on
your
machine and activate the program
cancellation command.
• If the error continues, contact the service.
Intended water
temperature could
not be reached
• Contact the service.
Faulty heater and
heater sensor
• Contact the service.
Alarm is active
against water
overflow
• Power off your machine and close the tap.
• Contact the service.
Faulty electronic
card
Inadequate water supply
VIII.
TROUBLESHOOTING
