12
Press program button (2) when the machine is off position.
Turn on the machine by pressing On/Off button (1) and continue to press program button (2) at
least for 3”.
If “Hardness set” is recognized all leds blink for 2 seconds.
Release program button (2). The last setting level is viewed.
Press program button (2) to set the desired level. At any pressure of program button hardness
level is incremented. Hardness level 1 returns after hardness level 6.
The last selected water hardness level is stored in the memory by cutting off energy of the
machine with On/Off button(1).
WARNING: in case of moving, to configure the water hardness setting according to the water
hardness of the area you have moved is important for the effectiveness of washing.
Detergent usage
Use a detergent specifically designed for use in domestic dishwashers.
You can find powder, gel, and tablet detergents in the market that have been designed for
household dishwashers.
Detergent should be put into the compartment prior to starting the machine. Keep your
detergents in cool, dry places out of reach of your children.
Do not fill detergent into the detergent compartment more than required; otherwise it may
cause scratches on your glasses as well as lead to a poorly dissolved detergent.
Should you need more information concerning the detergent you will use, contact detergent
manufacturers directly.
Filling the detergent compartment
Push the latch to open the detergent container as shown in the image. Detergent pod has level
lines inside. It is possible to measure the right detergent amount using these lines. Detergent
pod can take totally 40 cm3 detergent. Open the dishwasher detergent and pour into the larger
compartment b 25 cm3 if your dishes are heavily soiled or 15 cm3 if they are less soiled. If your
dishes have been kept dirty for a very long time, if there are dried food wastes on them, and if
you have overly loaded the dishwasher pour a 5 cm3 detergent into the pre-wash compartment
and start your machine.
You may have to add more detergent into your machine, depending on the degree of soil and
on the water hardness level in your area.
