12
VII.
LOADING YOUR DISHWASHER
For best results, follow these loading guidelines.
Loading the household dishwasher up to the capacity indicated by the manufacturer will
contribute to energy and water savings.
Manual pre-rinsing of tableware items leads to increased water and energy consumption and is
not recommended You can place cups, glasses, stemware, small plates, bowls, etc. in upper
basket. Do not lean long glasses against one another or they cannot remain steady and may
receive damage.
When placing long stem glasses and goblets, lean them against the basket edge or rack and not
against other items.
Place all containers such as cups, glasses and pots into the dishwasher with the opening facing
downwards otherwise water can collect on items.
If there is cutlery basket in machine, you are recommended to use the cutlery grid in order to
obtain the best result. Place all large (pots, pans, lids, plates, bowls etc.) and very dirty items in
the lower rack.
Dishes and cutlery should not be placed above each other.
WARNING:
Take care not to obstruct the rotation of spray arms.
WARNING:
Make sure after loading the dishes do not prevent opening the detergent dispenser.
Recommendations
Remove any coarse residue on dishes before placing the dishes in the machine. Start the
machine with full load.
Do not overload the drawers or place dishes in the wrong basket.
WARNING:
To avoid any possible injuries, place long-handle and sharp- pointed knives with
their sharp points facing down or horizontally on the baskets.
Height adjustable rack
The height adjustable racks enable glasses and cups to be placed on or under the racks. The
racks can be adjusted to 2 different heights. Cutlery and utensils can also be placed on the racks
horizontally.
