20
Cleaning the machine in regul
ar intervals prolongs the machine’s service life.
Make sure that the water softening setting (If available) is done correctly and correct amount
of detergent is used to prevent limescale accumulation. Refill the salt compartment when the
salt sensor light comes on.
Oil and lime may accumulate in the machine’s washing section. In case of such accumulation:
•
Fill the detergent compartment but do not load any dishes. Select a programme which
runs at high
temperature and run the Dishwasher empty. If this does not clean your Dishwasher sufficiently,
use a cleaning agent designed for use with dishwashers.
•
To extend the life of your dishwasher, clean the appliance regularly on each month
•
Wipe the door seals regularly with a damp cloth to remove any accumulated residue or
foreign objects.
Cleaning the seals in the machine door
-
-To clean any accumulated residues in the door seals, wipe the seals regularly by using
a dampened cloth.
Cleaning the machine
Clean the filters and spray arms at least once a week.
Unplug your machine and turn off its tap before starting the cleaning.
Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material and
a dampened cloth.
Filters
Check if any food wastes have remained on the coarse and fine filters. If any food wastes are
left, remove the filters and clean them thoroughly under the water tap.
a.
Micro Filter
b.
Coarse filter
c.
Metal Filter
To remove and clean the filter combination, turn it counter clockwise and remove it by lifting it
upwards (1).Pull the coarse filter out of the micro filter (2).Then pull and remove the metal
filter (3).Rinse the filter with lots of water until it is free of residue. Reassemble the filters.
Replace the filter insert, and rotate it clockwise (4).
•
Never use your Dishwasher without a filter.
•
Incorrect fitting of the filter will reduce the washing effectiveness.
•
Clean filters are necessary for proper running of the machine.
X. CLEANING AND MAINTENANCE
