10
Using combined detergents
These products should be used according to the detergent manufacturer’s instructions.
Never put combined detergents into the interior section or the cutlery basket.
Combined detergents contain not only the detergent but also rinse-aid, salt
replacement substances and additional components depending on the combination.
We recommend you do not use combined detergents in short programmes.
Please use powder detergents in such programmes.
If you encounter problems when using combined detergents, please contact the
detergent manufacturer.
When you stop using combined detergents, make sure that water hardness and rinse
aid settings are set to correct level.
Rinse-aid usage
Rinse-aid makes dishes sparkle and helps them to dry without spotting. Rinse-aid is required for
stain-free utensils and clear glasses. Use only rinse-aid for domestic dishwashers.
Filling the rinse-aid and setting
To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill the compartment
with rinse aid to the MAX level and then close the cap. Be careful not to overfill the rinse aid
compartment and wipe up any spills.
In order to change the rinse aid level, follow the below steps before turning on the machine:
Push the programme button and hold it down.
Turn on the machine.
Hold down the programme button until “rA” disappears from the display. Rinse aid set
follows water hardness set.
The machine will display the current setting.
Change level by pushing the programme button.
Switch off the machine to save the setting.
The factory setting is “4”.
If the dishes are not drying properly or are spotted, increase the level. If blue stains form on
your dishes, decrease the level.
