www.heinner.com 1800-2000W, 220-240V~50/60Hz
USING OF THE APPLIANCE
a.
Turn the temperature knob to the right, the heater is turned on. Set the thermostat to
the highest temperature MAX.
b.
Once reached the desired temperature, turn the thermostat counterclockwise along
until it reaches the thermostat the unit turns off by an audible "click".
c.
The set room temperature is thus maintained by the convector almost.
KNOB POSITION
a. Turn the knob to desired heating level according to the table below:
First setting
1250W
Second setting
2000W
b. The thermostat switches the convector on automatically and off. If the set
temperature falls below the convector begins to heat up until the temperature is reached
again.
c. The thermostat turns off the heater when the activated room temperature is reached.
The indicator does not light.
The blower (model dependent):
In order to better circulate the air in the room, you can turn the fan on the fan switch. The
fan indicator lights. The heated air is also blown through the air outlet grille.
V. CLEANING AND MAINTENANCE
•
Disconnect the device from the mains before cleaning!
•
Wait, if necessary, until it has cooled to normal temperature.
•
Clean the vents with a soft brush.
•
The rest of the case is to be wiped off with a soft, dry cloth.
•
If heavily soiled, use a slightly damp cloth.
•
Do not use abrasive cleaners or solution centerl!
•
For longer periods store the device protected from dirt and dust, and in a dry
place at.
