www.heinner.com 220-240V~50-60Hz, 900W
CONTROL PANEL
IV. USING THE APPLIANCE
Check that all accessories are complete, and the unit is not damaged. Fill water into water tank to the
MAX level and brew water for several times without coffee powder, then discard the water. Clean and
dry all detachable parts thoroughly according to the section “CLEANING AND MAINTENANCE”.
USING YOUR COFFEE MAKER
1. Open the top lid and fill the water tank with drinking water. The water level should not exceed MAX
level as indicated on the water gauge.
2. Place the funnel into the funnel support, make sure it is assembled correctly, otherwise the top lid
cannot be closed. Place permanent filter in the funnel.
3. Add coffee powder into permanent filter. Usually a cup of coffee needs a level spoon of coffee powder,
but you may adjust according to personal taste. Close the top lid completely.
4. Insert the carafe with handle closed onto warming plate horizontally.
5. Plug the power cord into the outlet. Press ON/OFF button, its indicator illuminates in red, the LCD
display indicates “12:00”, and then the appliance begins to work.
Note: The brewing process can be interrupted by pressing the ON/OFF button at any time, and the
indicator of ON/OFF button will extinguish, indicating your coffee maker is power off.
Note: During brewing process, the buttons of “PROGRAM”, “DELAY BREW”, “HOUR” and “MINUTE” are
invalid.
6. The brewing process can be interrupted by pressing the ON/OFF button at any time, the indicator will
extinguish. The appliance will continue brewing once the ON/OFF button button is pressed again.
Note: You can take out the carafe, pour and serve at any time. The appliance will stop dripping
automatically. But the time cannot exceed 30 seconds.
7. Remove out carafe to serve when finish brewing (about one minute later after the coffee stops
dripping out.)