lined up with the arrow pointer, i.e. if setting the timer at 8 p.m, rotate the outer ring
until the number 20 is in line with the arrow pointer.
Set the time the heater is required to run by pulling the segments around the outer
ring forward appropriate to the running period required.
When set, the heater will operate each day during the times programmed.
If the heater is required to run continuously, the slide switch on the timer should be
set to the
“I” position.
If it is subsequently required to revert back to timer operation, the slide switch on
the timer should be set to the central position.
Note: When using the timer mode, duely consideration should be given to the fact that the
heater may come on whilst unattended.
OVERHEAT SAFETY DEVICE:
Your heater is fitted with a safety device to switches off the heater in the event of
overheating. If the safety device operated, please turn the heater off, unplug the appliance
and let it completely cool, inspect for blockage of air inlet or outlet, attempting to restart
the heater then after.
If the heater fails to operate or the safety device switches the heater off again, return
heater to your nearest service center for examination or repair.
MAINTENANCE:
1. Always disconnect the appliance and let it completely cool before any maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never
immerse the unit in water, nor let water drip into the unit.
STORING:
1. Always disconnect the appliance, let it completely cool and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction
manual to the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may damage the
appliance.
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical
equipment’s to an appropriate waste disposal center.
Importer:
Asesoft Distribution
Europolis Logistic Park, Italia Street, 1-7, Chaijna, Ilfov, Romania
Tel: +4021 256 00 86,
www.heinner.com, www.asesoftdistribution.ro
Summary of Contents for HCH-218-TF
