Heinner HB-602PBK, Instruction Manual

Page: 6 / 56

www.heinner.com 600W, 220-240V~50Hz
5
.
V. USING YOUR BLENDER
Before the first use, clean the blender according to the section of “ quick cleaning” .
The time running unit without load can ’ t exceed 15s.
Important: Blades are very sharp, handle with care. Ensure that the hand-held blender is
unplugged from the power outlet before assembling or removing attachments.
Instruction for blender
Max operation duration per time cannot exceed 1 minute, and 3 minute rest time must
be maintained at two consecutive cycles.
1. To assemble the detachable shaft with the motor unit, turn the shaft anti-clockwise
direction until tightened. To disassemble, just turn in the adverse direction.
2. Simply plug the hand-held blender to power outlet.
3. Lower the hand-held blender into food. Then press and hold the low speed button to
start operating. At the same time you can select desired speed setting by dialing the
speed control dial, there are five settings: 1, 2, 3, 4, 5 (from low speed to high speed).
4. You also can start operating by pressing and hold the high speed button (turbo button),
the appliance will operate at the highest speed all the time. The speed will not change
even if you dial the speed control dial.
5. To stop the hand-held blender by releasing the low speed button or high speed button.
6.When blengding carrot, cut small piece, and place it into small chopper bowl, then add
water, the max quantify of carrot can't exceed 280g
，
water
，
420g, in every blending.
22. Be sure to switch off the appliance after each use of your food processor. Make sure the
motor stops completely before disassembling.
23.The metal blades are extremely sharp,please handle carefully.
24.Always hold the blade stem instead of cutting edge when handling and cleaning
the blade.
25. Be care of potential injury from misuse.
26. Save these instructions.