Heinner HAC-09OWF-BK, Manual

Page: 13 / 86

12
How to operate your unit without the remote control
In the event that your remote control fails to work, your unit can be operated
manually with the MANUAL CONTROL button located on the indoor unit. Note that
manual operation is not a long-term solution, and that operating the unit with your
remote control is strongly recommended.
BEFORE MANUAL OPERATION
Unit must be turned Off before manual operation.
To operate your unit manually:
1 . Press the button on both side of the indoor unit to loosen the panel, then lift the
front panel up, use the automatic telescopic rod to prop up the panel.
2 . Locate the MANUAL CONTROL button on the right-hand side of the unit. Press the
recessed button with your finger or the tip of a ballpoint pen.
3 . Press the MANUAL CONTROL button one time to activate FORCED AUTO mode.
4 . Press the MANUAL CONTROL again to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third time to turn the unit off.
6 . Hold the panel by hand, and press the middle position of the automatic telescopic
rod to close the front panel.
CAUTION
The manual button is intended for testing purposes and emergency operation only.
Please do not use this function unless the remote is lost and it is absolutely necessary.
To restore regular operation, use the remote control to activate the unit.
VI. USING INSTRUCTIONS (WITHOUT REMOTE CONTROLLER)