www.heinner.com 2000W, 50/60 Hz, 220-240V
13
VI. USING THE APPLIANCE
Vacuum Cleaning:
You can carry the vacuum cleaner by the handle at the front of the appliance.
Pull the cord out of the appliance and insert the mains plug into the wall
socket.
Press the on/off button on the top of the appliance with your foot or switch
on the appliance. See
Fig 3.
If you want to pause for a moment, insert the ridge on the floor brush into
the parking slot to set the tube in a convenient position.
Adjusting suction power:
You can adjust the suction power with the suction power slide on the
handgrip of the hose. See
Fig 4
The electronic suction power control on the vacuum cleaner (specific types
only) See
Fig 6.
Replacing the dust bag:
When the indicator light goes red, then it is the time to change the dust bag.
Lift the front cover pulling the lock pin outwards. See Fig7
Take out the dust bag holder, slide the stiff card section out along the
guides and then throw the bag away. See Fig 8
Insert a new bag by sliding the stiff card section out along the guides
and then place the dust bag holder in its lid.
Always unplug the appliance before you replace a filter.
Cleaning /replacing the motor filter:
Your vacuum cleaner is equipped with the motor protecting filter, replace the filter
once in a year.
Open the cover and pull the filter out of the appliance. See Fig 9
Insert a new filter into the holder.
Cleaning/replacing the exhaust air filter:
Your vacuum cleaner is equipped with the exhaust air filter, replace the filter once in a
year.
Open the exhaust filter cover and pull the filter out of the appliance.
Replace the filter in its compartment and fit it. See Fig 10.
Make sure the filter compartment is correctly placed before using the cleaner
