Heinner DCH-650RGBK, Manual, Page: 12 / 55

www.heinner.com 190W, 50Hz, 220-240V
11
BULB REPLACEMENT

The bulb must be replaced by the manufacturer, its service agent or similarly
qualified persons.

Always switch off the electricity supply before carrying out any operations on the
appliance. When handling bulb, make sure it is completely cool down before any
direct contact to hands.

When handling globes hold with a cloth or gloves to ensure perspiration does not
meet the globe as this can reduce the life of the globe.
LED LIGHTS
1.
Switch the unit off and pull out the plug first.
2. Wait until the light bulb is cooled down before replacement.
3. Remove the front part with the aid of screwdriver.
4. Pull out the LED light carefully and replace with the same type and rated LED light
(2*2W LSD-B1 LED light)
5. Replace the front part back to the unit with screwdriver.
• ILCOS D code for this lamp is: DBR-2/65-H-64
– LED modules –round lamp
– Max wattage: 2 W
– Voltage range: AC 220-240V
– Dimensions:
IMPORTANT
The following shows how to reduce total environmental impact (e.g. energy use) of the
cooking process).
(1) Install the cooker hood in a proper place where there is efficient ventilation.
(2) Clean the cooker hood regularly so as not to block the airway.
(3) Remember to switch off the cooker hood light after cooking.
(4) Remember to switch off the cooker hood after cooking.
INFORMATION FOR DISMANTLING
Do not dismantle the appliance in a way which is not shown in the user manual. The
appliance could not be dismantled by user. At the end of life, the appliance should not
be disposed of with household waste. Check with you Local Authority or retainer for
recycling advice.