www.heinner.com 65W, 50Hz, 220-240V
10
BULB REPLACEMENT
•
The bulb must be replaced by the manufacturer, its service agent or similarly
qualified persons.
•
Always switch off the electricity supply before carrying out any operations on the
appliance. When handling bulb, make sure it is completely cool down before any
direct contact to hands.
•
When handling globes hold with a cloth or gloves to ensure perspiration does not
meet the globe as this can reduce the life of the globe.
LED LIGHTS
Use the screw driver loosen the ST4*8MM self tapping screw (2pcs) from the lighting
panel, take out the lighting fixture. Open the terminal box that connected with the
wire, disconnect the wire connector and replace the lamp.
ILCOS D code for this lamp is: DBS-2.5/65-H-120/33
-LED modules
–
rectangle lamp
-Max. wattage: 2W
-Voltage range: AC 220-240V
-Dimensions:
IMPORTANT
The following shows how to reduce total environmental impact (e.g. energy use) of the
cooking process).
(1)
Install the cooker hood in a proper place where there is efficient ventilation.
(2)
Clean the cooker hood regularly so as not to block the airway.
(3)
Remember to switch off the cooker hood light after cooking.
(4)
Remember to switch off the cooker hood after cooking.
INFORMATION FOR DISMANTLING
Do not dismantle the appliance in a way which is not shown in the user manual. The
appliance could not be dismantled by user. At the end of life, the appliance should not
be disposed of with household waste. Check with your Local Authority or retainer for
recycling advice.
