16
USB Drive into the USB port of the NVR System within one minute. The video will be
saved to the USB Drive automatically.
Network Setup
To remotely watch the videos from mobile device or PC, please make sure the NVR is
connected to the router with the Ethernet cable first, then go to System setup > Network
setup > to check the Cloud ID, IP address and Web port, etc.
•
Make sure the status of the Cloud(P2P) is ONLINE
. If it’s
OFFLINE, please unplug the
Ethernet cable, then plug again to check the status.
•
The number after Cloud (P2P), e.g. 2416666666, is the Cloud ID of the NVR device.
•
Make sure the DHCP, Cloud (P2P) and Enable following the Net Diagnose Info are
checked.
•
Make sure the Network status is Healthy Network.
•
Web port may vary on different NVR systems.
•
If you are prompted that the DNS is wrong, please change it to 114.114.114.114 or
8.8.8.8.
•
If your network is not good, please change the MTU to 1000.
