HEIDENHAIN TNC 620 Programming Station, User Manual

Page: 101 / 695

Window manager 2.5
2
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
101
Backup and restore
With functions
NC/PLC Backup
and
NC/PLC Restore
you can save
and restore single directories or the complete TNC drive. You can
save the backup files locally on a network drive or to USB data
carriers.
The backup program generates a
*. tncbck
file that can also be
processed by the PC tool TNCbackup (part of TNCremo). The
restore program can restore these files as well as those from
existing TNCbackup programs. If a *. tncbck file is selected in
the file manager of the control, the program
NC/PLC Restore
is
automatically launched.
Backup and restore is subdivided into several steps. Navigate
between these steps with the
FORWARD
and
BACK
soft keys.
Specific actions for steps are selectively displayed as soft keys.
Open
NC/PLC Backup
or
NC/PLC Restore
Proceed as follows to open the functions:
Open the task bar at the bottom edge of the screen
Further Information: "Window manager", page 92
Press the green HEIDENHAIN button to open the JH menu
Select the
Tools
menu item
Open the
NC/PLC Backup
or
NC/PLC Restore
menu item
The control opens the pop-up window.
Backing up data
To backup data from the control, proceed as follows:
Select
NC/PLC Backup
Select the type
Back up the
TNC
partition
Back up the directory tree: Select the directory for backup in
the file management
Backup machine configuration (for machine tool builders only)
Complete backup (for machine tool builders only)
Comment: Freely configurable comment for the backup
Select the next step with the
FORWARD
soft key
Stop the control if required with the
STOP NC SOFTWARE
soft
key
Define the exclusion rules
User preset rules
Write own rules to the table
Select the next step with the
FORWARD
soft key
The control generates a list of files for backing up.
Check the list. Deselect files if necessary.
Select the next step with the
FORWARD
soft key
Enter the name of the backup file
Select the storage path
Select the next step with the
FORWARD
soft key
The control generates the backup file.
Confirm with the
OK
soft key
The control concludes the backup process and restarts the NC
software.