HEIDENHAIN TNC 320 User Manual Download Page 186

Page: 186 / 581

Programming: Programming contours

6.2

Fundamentals of Path Functions

186

TNC 320 | User's Manual

HEIDENHAIN Conversational Programming | 3/2014

Radius compensation

The radius compensation must be in the block in which you

move to the first contour element. You cannot activate radius

compensation in a circle block. It must be activated beforehand in

a straight-line block (see "Path contours - Cartesian coordinates",

page 196) or approach block (APPR block, see " Approaching and

departing a contour", page 188).

Pre-position

Danger of collision!

Before running a part program, always pre-position

the tool to prevent the possibility of damaging it or

the workpiece.

Creating the program blocks with the path function keys

The gray path function keys initiate the plain-language dialog. The

TNC asks you successively for all the necessary information and

inserts the program block into the part program.

Summary of Contents for TNC 320






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TNC 320

Reviews:

Related manuals for TNC 320

Brands by name

Popular brands

HEIDENHAIN TNC 320, User Manual

Search results

Summary of Contents for TNC 320

Reviews:

Related manuals for TNC 320

Brands by name

Popular brands