10
If the new motor is not listed in the motor table, either load the current motor table into
the control or add the motor to the exisiting motor table. For this purpose, enter the
specifications in the motor table.
Note:
The new spindle motor
QAN-200U-9000
or
QAN-200U-10000
works with the
same
electrical properties (e.g. maximum speed) at your machine as the corresponding
QAN-3U / QAN-3US
, provided that you have made the
stettings at the HEIDENHAIN
control
.
6. If your main spindle does not feature a separate position encoder, the line count of the spindle
position encoder must be changed from 2048 to 1024 in the machine parameters.
Please refer to the description in the Technical Manual of your HEIDENHAIN control!
7. Close the machine parameter list.
8. Switch on the machine.
9. Check the 0 deg. position of the main spindle and adjust it, if required.
10. When you have finished your work, create a backup of the control data with the changed entries
in the machine parameter list and the motor table.
Further information can be found in the Technical Manual of the respective
HEIDENHAIN control.
Name of motor
QAN-200U-9000
QAN-200U-10000
Spects for Motor table
motor.mot
motor.asn
Page 12
Page 13
Page 14
Page 15
