HEIDENHAIN ND 1200 QUADRA-CHEK, Installation Instructions Manual, Page: 17 / 118

17
ND 1200 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
7. Operating elements
Front Front (cont)
A Wide keys:
Programmable for
frequently used functions
G Arrow cursor keys:
Menu
navigation
B
LCD screen
H Send key:
Transmit measurement
data to PC, USB printer or USB drive
C
Soft keys:
Change to support
functions
I
Mode keys:
Select unit of measure,
datum, coordinate system or help
D Measure keys:
Initiate
measurements
J
Numeric keypad:
Enter numeric
data
E
Axis keys: Zero or preset datums
K
Command keys: Control
measurement
F
Menu key: Displays user menus
L
LCD on/off key: Turn LCD on or off
or delete features from the feature
list.
8. Initial power-up
To power-up the product:
X X
Press the On (supply) side of the power switch to power-up the product. The startup
screen is displayed.
9. Maintenance
The maintenance procedures described in these instructions may be required
during installation of the product. For additional maintenance information, refer to
the ND 1200 QUADRA-CHEK Operating Instructions .
Cleaning
Warning! Risk of electrical shock
While cleaning it is possible to conduct electricity from hazardous live parts if
liquid enters the product.
To avoid the hazard, always power off the product, disconnect the power cable
and never use a cloth that is dripping or saturated with water.
Notice
Never use abrasive cleaners, strong detergents or solvents to avoid damage to
the product.
To clean:
X X
Verify that the power switch is in the off position
X X
Disconnect the power cable from the source of power
X X
Wipe exterior surfaces with a cloth dampened with water and a mild household
detergent