HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 196 / 236

Settings |
Axes
11
11.6.7 <Axis name> (settings of the axis)
Path: Settings
►
Axes
►
<Axis name>
Parameters Explanation
Axis name Selection of the axis name displayed in the position preview
Axis type Definition of the axis type
Settings:
Not defined
Axis
Coupled axis
: Axis whose position value is offset against a
principal axis
Coupled axes do not appear in the position display.
The position axis shows only the principal axis
with the calculated position value of both axes.
For coupled axes, the product adapts the axis
name automatically. The axis name consists of
the name of the principal axis and the selected
calculation type, e.g.
+X .
Default value:
Axis
Encoder Configuration of the connected encoder
Further information: "Encoder", Page 197
Error compensation Configuration of the linear error compensation LEC or segment-
ed linear error compensation
SLEC
Further information: "Linear error compensation (LEC)",
Page 203
Further information:
"Segmented linear error compensation
(SLEC)", Page 203
Coupled main axis
For axes of the
Coupled axis
type:
Selecting the principal axis to be coupled with the axis
Default value: None
Calculation with main axis For axes of the Coupled axis type:
Calculation type for the position values of the principal (main)
axis and coupled axis
Settings:
+ : The position values are added (principal axis + coupled
axis)
- : The position values are subtracted (principal axis – coupled
axis)
Default value:
+
196
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020