HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 164 / 236

Measuring | Conducting a measurement
9
The MinMax function is deactivated
The position display shows the current position of each axis
You can send the measured values to a computer
Further information:
"Sending measured values to a computer", Page 164
The last measured values remain in the product's buffer memory and
can be transferred via measured value output, until you capture new
measured values with the
MinMax function.
9.2.7 Sending measured values to a computer
Use the functions for Measured value output to transfer measured values to a
computer manually or automatically.
Prerequisite: Measured-value output must be configured
Further information: "Configuring the measured value output", Page 141
Sending measured values manually
Conduct a measurement
Tap
Manual measured value output
The measured values are sent to the computer once
Activating touch-probe triggered output of measured values
Tap
Touch-probe triggered output of measured values
The green symbol shows that the function is active
Conduct a measurement
The measured values are sent to the computer each time the
stylus deflects
In order to deactivate the function, tap the
Touch-probe
triggered output of measured values function element
again
Activating continuous output of measured values
Tap Continuous output of measured values
The green symbol shows that the function is active
Conduct a measurement
The measured values are sent to the computer at a periodic
interval
In order to deactivate the function, tap the
Continuous
output of measured values function element again
In addition, you can activate automatic data transfer individually for each
probing function.
Further information: "Configuring probing functions", Page 131
164
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020