HEIDELBERG e.GO Wallbox home, Installation Instructions Manual

Page: 19 / 60

1
2
ST.000.0002-000GRAUND_00
Fig. 6 Grounding point of the column
7. Attach the second cable protecting sleeve (sep‐
arate parts set) to the cable outlet opening
(Fig. 6/2).
8. Feed the connecting line and, if appropriate, the
lines for an external enable/disable device out of
the cable outlet opening of the column.
9. Connect the equipotential bonding line to the
grounding pin (Fig. 6/1) of the column.
●
Sequence: contact disk, washer, cable lug/
cable, washer, spring ring, nut.
● Tightening torque 12 Nm.
10. Place the column upright and fasten onto the
foundation with the four screws.
1.8 Electrical connection of the Wallbox
The electrical connection procedure for the Wallbox is
documented in the installation instructions of the Wall‐
box.
1.9 Disposal
ST.000.0005-000GRAUND_00
Fig. 7
After the Wallbox has been correctly decommissioned,
dispose of the column according to the currently valid
disposal regulations.
Installation instructions
A.1.5