A
rt
41
8
Copyright © Hegen
Hegen retains all intellectual property rights to this product and packaging. Including all designs, graphic images and text.
Any reproduction of materials is strictly prohibited and constitutes infringement.
All Rights Reserved.
Patent Pending
Hegen Pte Ltd
438A Alexandra Road
Block A Alexandra Technopark
Unit #02-01 Singapore 119967
For your child’s safety and health
WARNING!
Straws are not suitable for a child under 6 months • Always use this product with adult supervision • Continuous and
prolonged sucking of fluids will cause tooth decay • Always check food temperature before feeding • Keep all components
not in use out of the reach of children • Before first use, clean the product • Inspect before each use. Throw away at the
first signs of damage or weakness • Before first use, place in boiling water for 5 minutes. This is to ensure hygiene • Clean
before each use • Dishwasher safe (top rack only). Food colouring, milk or oil residue that undergo heating processes may
stain or discolour parts permanently • Do not warm contents in a microwave as this may cause uneven heating and could
scald when drinking • Do not use in a heated oven or microwave. Always stir heated contents to ensure even heat
distribution and test the temperature before serving • This is not a toy • Do not allow child to play with small parts or
walk/run while using bottles or cups • Never attach to cords, ribbons, laces or loose parts of clothing. The child may be
strangled • Do not use abrasive cleaning agents or solvents as these may cause damage • Do not place components directly
on surfaces that have been cleaned with anti-bacterial cleaners • Plastic materials may be affected by high temperatures
and sterilising. This can affect the fitting and aesthetics of the product • Proper assembly is necessary to ensure a leak-free
experience.
Cleaning:
Always wash your hands with soap before cleaning, sterilising and feeding • Before first use, disassemble all parts, wash
with bottle detergent and rinse in clean water thoroughly before sterilising. This is to ensure hygiene. Always take all
components apart and wash the product with bottle detergent immediately after each use. • Always clean before and after
each use • When using a dishwasher (top rack only), avoid high-heat settings like “sanitary clean” or “heat boost” which
may distort components • Do not use chemically aggressive or abrasive cleaning agents, solvents or anti-bacterial cleaners
as these can damage the product • Cleaning the product with a wired bottle brush may cause scratches • Remember to
clean all sides as well as the base and covers of the bottles • Clean the insides of the straw with any standard straw brush.
• Do not clean 2-way valve with straw brush or any other cleaning tool. Gently rub valve in warm water with your fingers
to clean it.
Sterilising:
Suitable for sterilising by steam (electric), boiling water or cold water tablet/liquid solution. Should you choose to sterilise
with an electric steam steriliser, the sterilising instructions of the sterilisation devices should be carefully observed • For
boiling: Bring the water to boil, then submerge components in boiling water for no more than 3 minutes • Prior to
sterilisation, all components should be completely taken apart to avoid different reactions of materials which can cause
deformation • All grease or oil residue should be thoroughly removed before sterilising to avoid permanent staining of parts
• Chemical sterilisation or the use of hand cream and/or sun cream may cause the print to fade.
Assembly:
Proper assembly is required to ensure a leak-free experience. 1) Ensure
Straw Spout
is assembled with the
Removable
Seal
(Hegen logo facing outwards) to ensure air tight storage. 2) Insert
Upper Straw
from the internal side of the
Straw
Spout.
3) Pull up straw and press 2-way valve into the groove to secure. 4) Join
Upper Straw
and
Lower Straw
together.
5) To close, press down the
Straw Cap
until you hear a click. 6)
Press-to-Close
the
Straw Spout
and turn clockwise to
lock.
Twist-to-Open
the
Straw Spout
in an anti-clockwise direction.
Usage:
Do not fill bottle exceeding the maximum indicated volume line • Do not fully tilt bottle while drinking to avoid choking or
spillage •
Do not fill with hot liquids
or warm contents in a microwave as this may cause uneven heating and could scald
when drinking • A built-in 2-way valve in the
Upper Straw
allows for air to be released to balance internal and external air
pressure • To drink, flip open the
Straw Cap
. A two-step safety catch on the
Straw Spout
prevents the
Straw Cap
from
completely opening and allows for the slow release of air pressure, thus preventing sudden spurts of water • 1st safety
catch: The bent silicone
Upper Straw
will be lodged under the
Straw Cap
• 2nd safety catch: The silicone
Upper Straw
will straighten and
Straw Cap
will fully open and remains locked in place.
Caution:
Not suitable for use with hot (>40�) or carbonated beverages • Hot (>40�) or carbonated drinks may cause leakage at
the tip of the straw due to the build up of air pressure • To prevent leaks or spills, ensure that the straw cup remains upright
and avoid inverting or dropping the straw cup during use • Please note that drastic changes in the air pressure or ambient
temperature may cause leakage as well.