Hegel Rost, User Manual

Page: 16 / 20

16
Display On/Off
The DISP button on the RC8 remote control
may be used to turn the display of the Röst
on or off. Hold the DISP button for more
than 1 second to turn the display off.
Press the button turn the display on.
Home Theater or Standard Analog Input
The Analog2 can be changed into a Home
Theater input. This will set the Volume at a
fixed high volume level. Use the RC8 remote
to change the settings. Hold computer play
until the setup menu appears. Use comput-
er prev/next to navigate to “Home Theater”
and press computer play. Now you can
chose between Analog 2 or Home Theater.
Then press computer play to confirm. Now
don’t press anything for 15sec, and the Röst
will return to normal mode.
WARNING: Activating Home Theater sets
the volume at a high fixed level. This may
harm your speakers if a fixed level input is
connected.
Set Power Up-Volume
A user defined volume value may be used as
the power-up volume. The current volume is
set as the power-up volume by pressing and
holding the DAC+ button while pressing Vol-
on the RC8 remote control.
Max Volume
A user defined volume value may be used as
the max volume.
The current volume is set as the max volume
by pressing and holding the DAC+ button
while pressing Vol+ on the RC8 remote
control. To reset, put to max voulme, press
and holding the DAC+ button while pressing
Vol+ on the RC8 remote control.
Special Functions