RC8 REMOTE CONTROL
All HEGEL pre amplifiers can be controlled by the included HEGEL sys-
tem remote control, RC8. Like with other HEGEL products, the number of
buttons is kept to a minimum.
The input source is selected by pressing IN+ and IN-, the volume is
adjusted by pressing VOL+ and VOL-. The Mute function toggles on and
off by pressing the MUTE button. The HEGEL system remote control will
also control other HEGEL products like CD-players and integrated ampli-
fiers. When used with a P30 pre amplifier, pressing the ECO-button will
set it in a low power mode.
The remote control is using 2 standard 1.5-volt LR03 AAA batteries. To
insert the batteries please use a normal type cross head screwdriver
to gently remove the four screws in the bottom of the remote control.
Be careful and use a normal cross head screwdriver to remove the four
Philips cross head screws.
Be sure to insert the batteries with the correct polarity with + sign and
– sign as shown inside the battery holder, and be careful when insert-
ing the batteries to not damage the battery holder.
Be careful when inserting the screws after fitting the batteries. Please
turn the screws gently by hand first to avoid damaging the threads in
the remote control body. Do not tighten the screws to hard, as this also
can damage the screws and the soft metal body of the remote control.
Please do not drop the remote control hard down in the floor, as this can
damage internal parts of the remote control and the battery holder.
9
ECO
STOP
PREV
DAC+
PLAY
PREV PLAY
DISP
NEXT
IN+
NEXT
VOL+
MUTE
IN-
VOL-
COMPUTER
