1
P20 Back panel
1 :
Mains connector
2 :
Balanced XLR signal output right/left
3 :
Unbalanced RCA signal outputs right/left
4 :
Unbalanced RCA Rec signal output right/left
5 :
Unbalanced RCA Tuner signal input right/left
6 :
Balanced XLR signal inputs right/left
7-9 :
Unbalanced RCA signal inputs right/left
10 :
Home Theatre input (volume bypass)
GENERAL USE P20
The amplifier is switched on with the button in the middle of the
front panel. A blue light indicates it is switched on. To the left the
channel selector with selections: Balanced, CD, Video, Tuner, Auxil-
liary and Home Theatre, and to the right the volume control. The
selected input is indicated by a blue light.
When the mute button on the Hegel Remote Control is pressed, the
amplifier outputs are muted. Mute is indicated by a flashing blue
power light. To go back to normal operation press the mute button
one more time. After the amplifier is switched on, there is a delay of
a few seconds while the volume control circuit is being calibrated.
Avoid connecting input cables without making certain the unit is
completely turned off. We also recommend that you reduce volume
levels before changing inputs, as either may damage your loud-
speakers.
WARNING: The Home Theatre input bypasses the volume control.
Connecting a regular source to this input may potentially harm you
system and your hearing.
P20 Front panel
1 :
IR - remote control receiver
2 :
Input selector knob
3 :
Power on/off switch
4 :
Volume attenuator
2
3 4 5
6
7 8 9
10
1
2
3
4
6
High End Pre Amplifier
Hegel, Oslo, Norway
R
L
Inputs
Video
Aux
CD
Left
Balanced
Right
Tuner
Rec
RCA
Left
Outputs
Right
L
R
Apparatet må tilkoples
jordet stikkontakt
RA
46
Home Theatre
Max level input
Out
Balanced
Volume
Bal
CD
Video
Tuner
Aux
HT
