0
5
05
OPERATION NOTICE
[On regarding to keep and use conditions]
• Ensure to storage in aluminum case for avoiding high temperature,
High humility, even by vibration & dust.
• Take out batteries without using laser.
• Using the laser glasses at the job site/indoor where it’s a bit bright.
• Recommend to use detector at outdoor job site as if it’s more bright.
• Be assure that the switch is “OFF” after finishing all the working.
OPERATING METHOD
• First ensure that the Switch is located at “OFF” position and insert than
the batteries correctly.
• Place at a proper height and level ground as may possible.
• Turning the feets to find the vial bubble at the centre position in the
circle.
•Switch turn “ON”, the recessed vial will become to green light and
horizontal line is activated. Then keep press V1/V2 button to verify by
checking vertical lines V1/V2 activated conditions.
• Also the down point is always following to vertical function.
• By using detector press “OUTDOOR” button.
• Don’t press “OUTDOOR” button beside using the detector.
• Replace the batteries when the green led indicator starts twinkling.
• Take out the batteries in case you don’t use the laser for a longer time.
• To get a higher or various horizontal line you can use a elevator tripod.
