7
Using your new headphones
Connecting/Pairing your Bluetooth® device
Your
HEBT210
headphones will work with Bluetooth® enabled
mobile phones and applicably featured audio devices. Prior to using
and pairing your headphones for the first time, please check to
make sure that the Bluetooth® function on your mobile phone or
device is enabled. In general it is recommended that you refer to
the pairing instructions provided with your mobile phone/device.
The following instructions are for typical Bluetooth® enabled
mobile phones/audio devices. It is recommended you distance your
headphones and device no more than 1 metre apart to pair:
1. Starting from the Power OFF condition (See Page 6) press and
hold the
MFB
button
(1)
for approx. 3 seconds until the
Bluetooth
LED Bluetooth® and Battery indicator
(5)
rapidly
flashes alternately between BLUE and RED.
Your headphones are now in
PAIRING MODE
.
2. Enable searching of nearby Bluetooth® devices on your device.
When you see
HEBT210
listed as
FOUND
on your device you can
now select
CONNECT
to pair with them.
Note: If your device prompts you for a password, enter
0000
.
3. When pairing is successful, the
LED Bluetooth® and Battery
indicator
(1)
will emit a BLUE flash every 4 seconds approx.
If pairing is unsuccessful please turn off your headphones and
repeat these pairing steps.
4. Your headphones will automatically re-connect to the last
paired device when switched ON.