6
Using your new headphones
Charging the Battery
(Refer to the diagram shown on Page 5)
When the battery in your
HEBT210
headphones is almost
exhausted the
LED Bluetooth® and Battery indicator
(5)
will flash
RED and an audible "beep" will be heard. Using the
USB Charging
cable
supplied with your headphones, plug the micro USB
connector into the Charging port
(2)
. Connect the remaining USB
connector into a standard USB charger or USB computer port.
The
LED Bluetooth® and Battery indicator
(5)
will glow RED,
showing that the internal battery is charging.
When charging is complete this LED will switch off automatically.
Note this may take up to 3 hours if the battery is fully exhausted.
Switching Power ON/OFF
1. Power
ON
Press and hold the
MFB
button
(1)
for approx. 2 seconds.
The LED
Bluetooth® and Battery indicator (5)
will rapidly flash
alternately from RED to BLUE. This indicates it is in Bluetooth®
Pairing Mode (Please refer to Page 7).
2. Power
OFF
Press and hold the
MFB
button
(1)
for approx. 6 seconds.
The LED
Bluetooth® and Battery indicator (5)
will flash RED and a
audible "beep" will be heard.