EN
Heinz Electrodynamic Designs
SUrrOUND pOSITIONING
Place the speakers in a circle around your listening posi-
tion and work with the following angles: Center 0°, Front/
Right 30°, Rear/Right 110°, Rear/Left 250° and Front/Left
330°. The overall radius of the circle should be some-
where in between 0,7m and 2m. Also beware of the walls!
The surrounding walls should be at least 40cm away from
every speaker to avoid early reflections.
We recommend that you use the same type of speaker for
every channel (except the subwoofer, of course), because
otherwise you can run into negative frequency and/or
phase coloration. Check out the ITU recommendation
BS.2159-4 for a detailed explanation.
STAND/WALL MOUNTING
This speaker is equipped with two M6 (6mm) strew
threads on the rear side for stand/wall mounting. The
spacing between the two strew threads is 60mm. Please
contact us for more information on suitable mounting
hardware:
VerTICAL & HOrIzONTAL SeTUp
In a stereo setup we recommend placing the speakers ver-
tically and facing towards you. The tweeters should match
the height of your ears. Like this you will be as close as it
gets to hear the intended character of the monitor.
That being said, it is also possible to place a pair of Type
05s horizontally. In this case, you must make sure to align
them symmetrically. Both tweeters should face inwards.
Otherwise, the acoustical image will be distorted.
STereO pOSITIONING
For optimizing your listening position, place the two
speakers so that they form an equilateral triangle with
your listening position (see figure below). This position
should be an imaginary center point between the two
speakers. Now, if you have the space, play a recording that
you are familiar with and try playing around with adjust-
ing the distance of the speakers and the distance of your
listening position accordingly. Stop when you think that
you hear an authentic stereo panorama. Trust your ears,
they are your best friends.
Speaker Placement
Speaker Placement
30°
110°
110°
30°
CENTER